Commercial Lobby Floor in Selma
This commercial lobby floor in a Selma office building near the I-35 corridor replaced an aging vinyl composition tile floor. The concrete slab was ground and leveled before tile work began. A patterned 24x24 polished porcelain in a two-color geometric layout was selected for the lobby, which required careful layout planning from the center of the space to ensure the pattern aligned symmetrically with the building's entry axis.
Commercial lobby floors see concentrated foot traffic at entry points, so the tile selected carries a high traffic rating and a wet DCOF above 0.42. The grout used was an epoxy grout for durability and stain resistance in a high-use public space. Work was staged across evenings and a weekend to minimize disruption to the building's tenants, with sections cordoned off as they cured.
Project Details
| Service | Commercial Tile Installation |
|---|---|
| Area | Selma, TX |
| Materials | 24x24 polished porcelain, two-color geometric pattern, epoxy grout |
| Scope | Commercial lobby floor |
| Timeline | Multi-day install, staged around building occupancy |
What We Did
Ground and leveled concrete slab, removed existing VCT flooring and adhesive residue
Established center layout axis aligned with entry doors, dry-laid pattern to verify symmetry
Set 24x24 polished porcelain with large-notch trowel and back-buttering, used leveling system
Applied epoxy grout in sections, cleaned thoroughly before epoxy hardened
Have a commercial tile project in Selma? Call (726) 227-9239 or send a message.
